Menu
JPFL Films Private Limited

Transparent Heat Sealable

Product Table / Data Sheet

 

Type Description Standard Thickness* (µ) USP Application PDF
H1 Transparent Both Side Heat Sealable One Side Corona Treated 15 to 50 µ
  • Excellent Hot-Tack and Seal Strength on Both Sides
  • High Surface Gloss and Transparency
  • Very Good Barrier Properties
  • Excellent Slip and Antistatic Properties
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Inks and Adhesive on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Transparent, both side heat sealable one side corona treated film for single/two ply printing lamination application  
H1-LS Transparent Low Heat Sealable Low COF One Side Corona Treated 15 to 50 µ
  • Low Seal Initiation Temperature
  • Very High Hot-Tack and Seal Strength
  • High Surface Gloss and Transparency
  • Very Good Barrier Properties
  • Excellent Slip and Antistatic Properties
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Inks and Adhesive on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Low Heat Sealable, One Side Corona Treated, Low COF Film for single / two Ply Packaging Structure for High Speed Packaging Applications  
H1-AFT Transparent High Heat Seal Strength High Hot-tack One Side Corona Treated Antifog Film 20 TO 50 µ
  • Excellent Antifog Effect – Both for Cold / Hot Fog Application
  • Very High Seal Strength and Hot-tack Properties
  • High Surface Gloss and Transparency
  • Very Good Barrier Properties
  • Excellent Slip and Antistatic Properties
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Inks and Adhesive on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Transparent, High Heat Seal Strength High Hot-tack one Side Corona Treated Anti-fog Film for Vegetable / Fruit and other Packaging Purpose where Packaged Food to be Kept under Refrigeration or Room / Elevated Temperature. Anti-fog Property of the Film Prevent Fogging Inside the Package and Excellent see through Of the Film. This Film is Applicable for Both Cold and Hot Fog Applications and can be used as single / two Ply Packaging Structure  
H1-AFC Transparent High Heat Seal Strength High Hot-tack One Side Corona Treated Antifog Film 20 TO 50 µ
  • Good Antifog Effect – Both for Cold / Hot Fog Application
  • Very High Seal Strength and Hot tack Properties
  • High Surface Gloss and Transparency
  • Very Good Barrier Properties
  • Excellent Slip and Antistatic Properties
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Inks and Adhesive on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Transparent, High Heat Seal Strength High Hot-tack one Side Corona Treated Anti-fog Film for Vegetable / Fruit and other Packaging Purpose where Packaged Food to be Kept under Refrigeration or Room / Elevated Temperature. Anti-fog Property of the Film Prevent Fogging Inside the Package and Excellent see through Of the Film. This Film is Applicable for Both Cold and Hot Fog Applications and can be used as single / two Ply Packaging Structure  
H1-AFD Transparent High Heat Seal Strength High Hot-tack One Side Corona Treated Antifog Film 20 TO 50 µ
  • Very Good Antifog Effect – Both for Cold / Hot Fog Application
  • High Seal Strength and Hot tack Properties
  • High Surface Gloss and Transparency
  • Very Good Barrier Properties
  • Excellent Slip and Antistatic Properties
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Inks and Adhesive on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Transparent, High Heat Seal Strength High Hot-tack one Side Corona Treated Anti-fog Film for Vegetable / Fruit and other Packaging Purpose where Packaged Food to be Kept under Refrigeration or Room / Elevated Temperature. Anti-fog Property of the Film Prevent Fogging Inside the Package and Excellent see through Of the Film. This Film is Applicable for Both Cold and Hot Fog Applications and can be used as single / two Ply Packaging Structure  
H1-ULS Transparent Ultra Low Heat Sealable Low COF One Side Corona Treated 15 to 50 µ
  • Ultra Low Seal Initiation Temperature
  • Very High Hot-Tack and Seal Strength
  • High Surface Gloss and Transparency
  • Very Good Barrier Properties
  • Excellent Slip and Antistatic Properties
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Inks and Adhesive on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Ultra-Low Heat Sealable, One Side Corona Treated, Low COF Film for single / two Ply Packaging Structure for High Speed Packaging Applications  
H1-UUS Transparent Ultra Ultra Low Heat Sealable Low COF One Side Corona Treated 15 to 50 µ
  • Ultra Ultra Low Seal Initiation Temperature
  • Very High Hot-Tack and Seal Strength
  • High Surface Gloss and Transparency
  • Very Good Barrier Properties
  • Excellent Slip and Antistatic Properties
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Inks and Adhesive on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Ultra Ultra-Low Heat Sealable, One Side Corona Treated, Low COF Film for single / two Ply Packaging Structure for High Speed Packaging Applications  
H2-OW Transparent Both Side Heat Sealable Both Side Treated 18 to 35 µ
  • Very High Hot-Tack and Seal Strength on Both Sides
  • High Surface Gloss and Transparency
  • Excellent Adhesion of Inks and Coatings on Treated Side
  • Very Good Barrier Properties
  • Excellent Slip and Antistatic Properties
  • Excellent Machinability on High Speed Overwrap Machines
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Both Side Heat Seal Treated Film for Various Printed Over Wrap Applications Like Cassette / Cd / Paper Board Boxes / Cable Etc.  
S1 Transparent One Side Non Heat Sealable Corona Treated Other Side Heat Sealable 18 TO 35 µ
  • Excellent Hot-Tack and Seal Strength on Sealable Side
  • High Surface Gloss and Transparency
  • Very Good Barrier Properties
  • Excellent Slip and Antistatic Properties
  • Excellent Surface Treatment Retention
  • Excellent Adhesion of Inks and Adhesive on Non Sealable Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Transparent, One Side Non Heat Sealable Corona Treated Other Side Heat Sealable Film for single / two Ply Printing Lamination & Biscuit Inner Wrap Application  
N1-BGR Transparent Heat Sealable, One side Corona Treated 25 TO 50 µ
  • High Surface Gloss
  • High Clarity
  • High Surface Treatment Retention
  • High Anchorage of Inks on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Textile Bag Application and Conversion  
N1-BGS Transparent Heat Sealable One Side Corona Treated 25 TO 50 µ
  • High Surface Gloss
  • Excellent Clarity
  • Excellent Surface Treatment Retention
  • Excellent Anchorage of Inks on Treated Side
  • Excellent Machinability
  • Excellent Mechanical Properties
  • Excellent Dimensional Stability
 Textile Bag Application and Conversion  
H0-GPW Transparent Both Side Heat Sealable Untreated 18 TO 20 µ
  • Low Seal Initiation Temperature
  • High Hot-Tack and Heat-Seal Strength
  • High Surface Gloss and Transparency
  • Excellent Machinability
  • Excellent Dimensional Stability
  • Slip modified to Exhibit Good slip Performance at Packaging Machines
 Ivy Fluid Bottle Overwrap, General Purpose Overwrap  
H0-GPU Transparent Low Sit, Heat Sealable Untreated 18 TO 20 µ
  • Very Low Seal Initiation Temperature (SIT)
  • High Hot-Tack and Heat-Seal Strength
  • High Surface Gloss and Transparency
  • Excellent Machinability
  • Excellent Dimensional Stability
  • Slip modified to exhibit good slip Performance at Packaging Machines
 Ivy Fluid Bottle Overwrap, General Purpose Overwrap  

THERMAL GLOSS FINISH BOPP FILM

Application:

Transparent, both side heat sealable one side corona treated film for single/two ply printing lamination application

Description:

Transparent Both Side Heat Sealable One Side Corona Treated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H1
Transparent Both Side Heat Sealable One Side Corona Treated
Transparent, both side heat sealable one side corona treated film for single/two ply printing lamination application Transparent, both side Heat Sealable, One Side Corona Treated OPP Film with Excellent Barrier, Clarity, Slip and Antistatic Properties for Single / Two Ply printing laminate application. The Corona treated side is specifically designed for Excellent Adhesion of Inks and Lamination Adhesive during conversion. Both the sides exhibit Excellent hot-tack and Seal Strength.

THERMAL GLOSS FINISH BOPP FILM

Application:

Low Heat Sealable, One Side Corona Treated, Low COF Film for single / two Ply Packaging Structure for High Speed Packaging Applications

Description:

Transparent Low Heat Sealable Low COF One Side Corona Treated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H1-LS
Transparent Low Heat Sealable Low COF One Side Corona Treated
Low Heat Sealable, One Side Corona Treated, Low COF Film for single / two Ply Packaging Structure for High Speed Packaging Applications Transparent Low Heat Sealable Low Co-efficient of Friction One Side Corona Treated OPP Film with Excellent Clarity, Slip and Antistatic Properties for Single / Two Ply Laminate for High Speed Packaging Application. The Corona treated side is specifically designed for Excellent Adhesion of Inks and Lamination Adhesive during conversion. Both the sides exhibit very High Hot-tack and Seal Strength.

THERMAL GLOSS FINISH BOPP FILM

Application:

Transparent, High Heat Seal Strength High Hot-tack one Side Corona Treated Anti-fog Film for Vegetable / Fruit and other Packaging Purpose where Packaged Food to be Kept under Refrigeration or Room / Elevated Temperature. Anti-fog Property of the Film Prevent Fogging Inside the Package and Excellent see through Of the Film. This Film is Applicable for Both Cold and Hot Fog Applications and can be used as single / two Ply Packaging Structure

Description:

Transparent High Heat Seal Strength High Hot-tack One Side Corona Treated Antifog Film

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H1-AFT
Transparent High Heat Seal Strength High Hot-tack One Side Corona Treated Antifog Film
Transparent, High Heat Seal Strength High Hot-tack one Side Corona Treated Anti-fog Film for Vegetable / Fruit and other Packaging Purpose where Packaged Food to be Kept under Refrigeration or Room / Elevated Temperature. Anti-fog Property of the Film Prevent Fogging Inside the Package and Excellent see through Of the Film. This Film is Applicable for Both Cold and Hot Fog Applications and can be used as single / two Ply Packaging Structure Antifog Transparent, High Heat Seal Strength High Hottack, One Side Corona Treated OPP Film with Excellent Barrier, Clarity, Slip and Antistatic Properties for Single / Two Ply Printing Lamination Application. This film exhibits excellent Antifog Effect on refrigeration or at room / elevated temperature. The corona treated side is specifically designed for excellent adhesion of inks and lamination adhesive during conversion. Antifog side of the film must have to be in contact with the food.

THERMAL GLOSS FINISH BOPP FILM

Application:

Transparent, High Heat Seal Strength High Hot-tack one Side Corona Treated Anti-fog Film for Vegetable / Fruit and other Packaging Purpose where Packaged Food to be Kept under Refrigeration or Room / Elevated Temperature. Anti-fog Property of the Film Prevent Fogging Inside the Package and Excellent see through Of the Film. This Film is Applicable for Both Cold and Hot Fog Applications and can be used as single / two Ply Packaging Structure

Description:

Transparent High Heat Seal Strength High Hot-tack One Side Corona Treated Antifog Film

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H1-AFC
Transparent High Heat Seal Strength High Hot-tack One Side Corona Treated Antifog Film
Transparent, High Heat Seal Strength High Hot-tack one Side Corona Treated Anti-fog Film for Vegetable / Fruit and other Packaging Purpose where Packaged Food to be Kept under Refrigeration or Room / Elevated Temperature. Anti-fog Property of the Film Prevent Fogging Inside the Package and Excellent see through Of the Film. This Film is Applicable for Both Cold and Hot Fog Applications and can be used as single / two Ply Packaging Structure Antifog Transparent, High Heat Seal Strength High Hottack, One Side Corona Treated OPP Film with Excellent Barrier, Clarity, Slip and Antistatic Properties for Single / Two Ply Printing Lamination Application. This film exhibits good Antifog Effect on refrigeration or at room / elevated temperature. The corona treated side is specifically designed for excellent adhesion of inks and lamination adhesive during conversion. Antifog side of the film must have to be in contact with the food.

THERMAL GLOSS FINISH BOPP FILM

Application:

Transparent, High Heat Seal Strength High Hot-tack one Side Corona Treated Anti-fog Film for Vegetable / Fruit and other Packaging Purpose where Packaged Food to be Kept under Refrigeration or Room / Elevated Temperature. Anti-fog Property of the Film Prevent Fogging Inside the Package and Excellent see through Of the Film. This Film is Applicable for Both Cold and Hot Fog Applications and can be used as single / two Ply Packaging Structure

Description:

Transparent High Heat Seal Strength High Hot-tack One Side Corona Treated Antifog Film

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H1-AFD
Transparent High Heat Seal Strength High Hot-tack One Side Corona Treated Antifog Film
Transparent, High Heat Seal Strength High Hot-tack one Side Corona Treated Anti-fog Film for Vegetable / Fruit and other Packaging Purpose where Packaged Food to be Kept under Refrigeration or Room / Elevated Temperature. Anti-fog Property of the Film Prevent Fogging Inside the Package and Excellent see through Of the Film. This Film is Applicable for Both Cold and Hot Fog Applications and can be used as single / two Ply Packaging Structure Antifog Transparent, High Heat Seal Strength High Hottack, One Side Corona Treated OPP Film with Excellent Barrier, Clarity, Slip and Antistatic Properties for Single / Two Ply Printing Lamination Application. This film exhibits good Antifog Effect on refrigeration or at room / elevated temperature. The corona treated side is specifically designed for excellent adhesion of inks and lamination adhesive during conversion. Antifog side of the film must have to be in contact with the food.

THERMAL GLOSS FINISH BOPP FILM

Application:

Ultra-Low Heat Sealable, One Side Corona Treated, Low COF Film for single / two Ply Packaging Structure for High Speed Packaging Applications

Description:

Transparent Ultra Low Heat Sealable Low COF One Side Corona Treated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H1-ULS
Transparent Ultra Low Heat Sealable Low COF One Side Corona Treated
Ultra-Low Heat Sealable, One Side Corona Treated, Low COF Film for single / two Ply Packaging Structure for High Speed Packaging Applications Transparent Ultra Low Heat Sealable Low Co-efficient of Friction One Side Corona Treated OPP Film with Excellent Clarity, Slip and Antistatic Properties for Single / Two Ply Laminate for High Speed Packaging Application. The corona treated side is specifically designed for excellent adhesion of inks and lamination adhesive during conversion. Both the sides exhibit very high hot-tack and seal strength.

THERMAL GLOSS FINISH BOPP FILM

Application:

Ultra Ultra-Low Heat Sealable, One Side Corona Treated, Low COF Film for single / two Ply Packaging Structure for High Speed Packaging Applications

Description:

Transparent Ultra Ultra Low Heat Sealable Low COF One Side Corona Treated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H1-UUS
Transparent Ultra Ultra Low Heat Sealable Low COF One Side Corona Treated
Ultra Ultra-Low Heat Sealable, One Side Corona Treated, Low COF Film for single / two Ply Packaging Structure for High Speed Packaging Applications Transparent Ultra Ultra Low Heat Sealable Low Co-efficient of Friction One Side Corona Treated OPP Film with Excellent Clarity, Slip and Antistatic Properties for Single / Two Ply Laminate for High Speed Packaging Application. The corona treated side is specifically designed for excellent adhesion of inks and lamination adhesive during conversion. Both the sides exhibit very high hot-tack and seal strength

THERMAL GLOSS FINISH BOPP FILM

Application:

Both Side Heat Seal Treated Film for Various Printed Over Wrap Applications Like Cassette / Cd / Paper Board Boxes / Cable Etc.

Description:

Transparent Both Side Heat Sealable Both Side Treated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H2-OW
Transparent Both Side Heat Sealable Both Side Treated
Both Side Heat Seal Treated Film for Various Printed Over Wrap Applications Like Cassette / Cd / Paper Board Boxes / Cable Etc. Transparent, Both Side Heat Sealable, Treated OPP Film with Excellent Barrier, Clarity, Slip and Antistatic Properties for Various Overwrap Application. The film is treated on both the sides for facilitating printing prior to over wrapping. Both treated heat seal sides are specifically designed for providing excellent hot tack and seal strength on high speed overwrap machines. The slip and antistatic properties are well balanced for providing excellent machinability during overwrapping process. Low heat seal initiation characteristic of the film is help to utilise the maximum operating speed of overwrap machine without compromising on sealing properties.

THERMAL GLOSS FINISH BOPP FILM

Application:

Transparent, One Side Non Heat Sealable Corona Treated Other Side Heat Sealable Film for single / two Ply Printing Lamination & Biscuit Inner Wrap Application

Description:

Transparent One Side Non Heat Sealable Corona Treated Other Side Heat Sealable

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
S1
Transparent One Side Non Heat Sealable Corona Treated Other Side Heat Sealable
Transparent, One Side Non Heat Sealable Corona Treated Other Side Heat Sealable Film for single / two Ply Printing Lamination & Biscuit Inner Wrap Application Transparent, One Side Heat Sealable, One Side Corona Treated OPP Film with Excellent Barrier, Clarity, Slip and Antistatic Properties for Single / Two Ply Printing Lamination & Biscuit Inner Wrap Application. The corona treated side is specifically designed for excellent adhesion of inks and lamination adhesive during conversion. Both the sides exhibit excellent hot-tack and seal strength

THERMAL GLOSS FINISH BOPP FILM

Application:

Textile Bag Application and Conversion

Description:

Transparent Heat Sealable, One side Corona Treated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
N1-BGR
Transparent Heat Sealable, One side Corona Treated
Textile Bag Application and Conversion Transparent, Heat Sealable, One Side Corona Treated, High Glossy OPP Film for use in Textile Bag Application & conversion. The corona treated side is specifically designed for reverse printing and also exhibits high heat-seal strength. Film is designed for excellent machinability during printing and bag making process.

THERMAL GLOSS FINISH BOPP FILM

Application:

Textile Bag Application and Conversion

Description:

Transparent Heat Sealable One Side Corona Treated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
N1-BGS
Transparent Heat Sealable One Side Corona Treated
Textile Bag Application and Conversion Transparent, Heat Sealable, One Side Corona Treated, High Glossy OPP Film for use in Textile Bag application & conversion. The corona treated side is specifically designed for surface printing and excellent anchorage of inks. Film is designed for excellent machinability during printing and bag making process.

THERMAL GLOSS FINISH BOPP FILM

Application:

Ivy Fluid Bottle Overwrap, General Purpose Overwrap

Description:

Transparent Both Side Heat Sealable Untreated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H0-GPW
Transparent Both Side Heat Sealable Untreated
Ivy Fluid Bottle Overwrap, General Purpose Overwrap Transparent both side heat-sealable and both side untreated film

THERMAL GLOSS FINISH BOPP FILM

Application:

Ivy Fluid Bottle Overwrap, General Purpose Overwrap

Description:

Transparent Low Sit, Heat Sealable Untreated

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
H0-GPU
Transparent Low Sit, Heat Sealable Untreated
Ivy Fluid Bottle Overwrap, General Purpose Overwrap Transparent low SIT both side heat-sealable and both side untreated film
 

About Us

Applications

Products

Other Links

E-Sales

*Disclosure: Formerly a Division of Jindal Poly Films Limited.

Follow Us On