Menu

High Transparent Barrier Films

Product Table / Data Sheet

 

Type Description Standard Thickness* (µ) USP Application PDF
J-200P0 One side PVdC coated transparent polyester packaging film. The film is printable on coated side and can be sealed coating to coating side. It has excellent moisture, oxygen and aroma barrier. 12,13,14,25,32,38 µ
  • Resistance to pasteurization
  • Excellent water, gas and aroma barrier
  • High transparency
  • Excellent dimensional stability
  • PVdC can be easily laminated with other substrates
  • Very good compatibility with NC, PVB inks
  • Suitable for flexo and gravure printing
For see through packaging application. The film is suitable for pasteurization application without losing its barrier properties and transparency.  
J-172P0 One side PVdC coated transparent polyester packaging film. The film is printable on coated side and can be sealed coating to coating. It has excellent moisture, oxygen and aroma barrier. 12,13,14 µ
  • Non-pasteurizable grade
  • Excellent water, gas and aroma barrier
  • High transparency
  • Excellent dimensional stability
  • PVdC can be easily laminated with other substrates
  • Very good compatibility with NC, PVB inks
  • Suitable for flexo and gravure printing
  • Solvent free coating
For see through packaging application. The film is suitable for non-pasteurization application.  
J-311AP Transparent one side acrylic coated other side high barrier PVdC coated OPP film with excellent clarity, slip and antistatic properties. The film exhibits excellent gas, moisture and aroma barrier properties and excellent seal integrity on both the coated surface. 21,26,31,36,41,46,51 µ
  • Excellent water, gas and aroma barrier
  • Excellent seal strength and hotack
  • Excelent clarity and gloss
  • Excellent dimensional stability
  • PVdC can be easily laminated with other substrates
  • Very good compatibility with NC, PVB inks
  • Suitable for flexo and gravure printing
  • Solvent free coating
For see through packaging application.  
J-311AA Transparent both side acrylic coated film with excellent clarity, slip and antistatic properties. The film exhibits excellent moisture and aroma barrier properties and excellent seal integrity on both coated surface with 20,25,30,35,40,45,50 µ
  • Excellent water and aroma barrier
  • Excellent seal strength and hotack
  • Broad heat seal range
  • Excelent clarity and gloss
  • Excellent dimensional stability
  • Ideal support for water based ink printing
  • Suitable for flexo and gravure printing
  • Solvent free coating
For see through packaging and wrapping application.  

THERMAL GLOSS FINISH BOPP FILM

Application:

For see through packaging application. The film is suitable for pasteurization application without losing its barrier properties and transparency.

Description:

One side PVdC coated transparent polyester packaging film. The film is printable on coated side and can be sealed coating to coating side. It has excellent moisture, oxygen and aroma barrier.

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
J-200P0
One side PVdC coated transparent polyester packaging film. The film is printable on coated side and can be sealed coating to coating side. It has excellent moisture, oxygen and aroma barrier.
For see through packaging application. The film is suitable for pasteurization application without losing its barrier properties and transparency. For packaging application where high barrier required. It can be surface or reverse printed and can be laminated with other webs. The film is printable on coated side and can be sealed coating to coating.

THERMAL GLOSS FINISH BOPP FILM

Application:

For see through packaging application. The film is suitable for non-pasteurization application.

Description:

One side PVdC coated transparent polyester packaging film. The film is printable on coated side and can be sealed coating to coating. It has excellent moisture, oxygen and aroma barrier.

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
J-172P0
One side PVdC coated transparent polyester packaging film. The film is printable on coated side and can be sealed coating to coating. It has excellent moisture, oxygen and aroma barrier.
For see through packaging application. The film is suitable for non-pasteurization application. For packaging application where high barrier required. It can be surface or reverse printed and can be laminated with other webs. The film is printable on coated side and can be sealed coating to coating.

THERMAL GLOSS FINISH BOPP FILM

Application:

For see through packaging application.

Description:

Transparent one side acrylic coated other side high barrier PVdC coated OPP film with excellent clarity, slip and antistatic properties. The film exhibits excellent gas, moisture and aroma barrier properties and excellent seal integrity on both the coated surface.

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
J-311AP
Transparent one side acrylic coated other side high barrier PVdC coated OPP film with excellent clarity, slip and antistatic properties. The film exhibits excellent gas, moisture and aroma barrier properties and excellent seal integrity on both the coated surface.
For see through packaging application. For packaging application where high barrier required in single /two /three ply packaging structures and for wrapping applications

THERMAL GLOSS FINISH BOPP FILM

Application:

For see through packaging and wrapping application.

Description:

Transparent both side acrylic coated film with excellent clarity, slip and antistatic properties. The film exhibits excellent moisture and aroma barrier properties and excellent seal integrity on both coated surface with

Salient Features:

Typical values

Product Code Micron Description Layers Application Application Description Salient Features Thickness Grammage Yield Treatment Level 1 Treatment Level 2 Wetting Tension (Plainl) Wetting Tension (Coated Side) Wetting Tension (Corona Side) Treatment level ( Coated side) Treatment level (PVdC coated side) Treatment level ( Acrylic side) Treatment level (Plain side) Treatment level (Corona side) Treatment level (Metal side) Treatment level (Other side) Optical Densityl (Min) Metal Bond Strength COF Max (Untreated/Untreated) Max COF Max Ato B (oppostive Surfces) Max 1 COF Max Ato B (oppostive Surfces) Max 2 COF (Coated/uncoated) COF (Acrylic/Acrylic) COF (PVdC/PVdC) COF (coated/metal) COF (uncoated/metal) Haze Gloss at 60 Tensile Strength (MD) Min Tensile Strength (TD) Min Modulus (MD) Modulus (TD) Elongation (MD) Min Elongation (TD) Min Shrinkage (150°C/30min) MD Max Shrinkage (150°C/30min) TD Max Shrinkage (190°C/20min) MD Max Shrinkage (190°C/20min) TD Max Water Vapour Transmission Rate Oxygen Gas Transmission Rate BDV (KV) Volume Resistivity Surface Resistivity Opacity Min Ratio OF TS (+450/-450) Wettability (min) Coefficient of Friction Elongation at break MD Elongation at break TD Seal strength VTR (38°C & 90% RH) OTR (23°C & 0% RH) Antifog (Hot) Antifog (Cold) Heat Seal Range Treatment at Extrusion coated side – min. Treatment at Uncoated Matte side – min. Gloss – Uncoated Matte side (at 45°) Lamination temperature Seal strength(Acrylic/Acrylic) @130ºC/2 Bar /1 Sec (min) Seal strength(Acrylic/Acrylic) @140ºC/2 Bar /1 Sec (min) Seal strength(PVdC/ PVdC) @140ºC/2 Bar /1 Sec (min) Silicon Rub-off Release force(Tesa tape -7475, @300 mm/min, 180° peeling)
PHYSICAL
J-311AA
Transparent both side acrylic coated film with excellent clarity, slip and antistatic properties. The film exhibits excellent moisture and aroma barrier properties and excellent seal integrity on both coated surface with
For see through packaging and wrapping application. For packaging application where high moisture and aroma barrier required in single /two /three ply packaging structures and for wrapping applications